Hardwood floor refinishing cost calculator

Estimate a full sand and refinish or a screen and recoat for your hardwood floors, with stain, board repair and stairs, adjusted for flooring installer wages where you live. Every price line shows where it comes from.

National prices. Enter a ZIP code to adjust for local flooring installer wages.

Length × width of each room, added up. A 15 × 20 ft room is 300 sq ft.

A full sand and refinish takes the floor back to bare wood. A screen and recoat lightly buffs the finish and adds a new coat; it does not remove deep scratches or change the color.

Deep gouges, water stains or loose boards that need patching before the refinish.

Estimated cost

$900–$2,400

Middle of the range: $1,650

$3–$8 per sq ft

300 sq ft, full sand and refinish, national prices.

National prices. Add your ZIP code to adjust the labor part for local flooring installer wages.

Itemized estimate
LineRange
Full sand and refinish (300 sq ft)$900–$2,400
Total$900–$2,400

Replacing the floor instead would cost about $3,000–$8,100 ($10–$27 per sq ft for solid hardwood and removal of the old floor, national, from our flooring cost calculator).

How often: a full refinish every 7–10 years (This Old House; HomeGrail), with a screen and recoat in between when the finish looks dull.

  • Rates per sq ft: stain $1–$3, board repair $8–$12 per sq ft of damaged area, stairs $25–$45 per step (one source).
  • Not priced: dustless refinishing ($6–$8 per sq ft in total, one publisher) and moving furniture ($20–$50 per room, one publisher, and contractors may or may not include it). Ask for them in the quote.
  • Wood species changes the price a little (harder woods take longer to sand); one generic rate is used.
  • Refinishing usually needs no permit (Miami exempts floor finishes in single-family homes and duplexes), but some cities and condo buildings require one; ask your local building office.

An estimate from published national prices, not a quote. Only a flooring contractor who sees the floor can price the job.

Get a quote for refinishing your floors

Your estimate is sent with your request, so the local contractor knows the job before calling.

No spam calls. We share your details only with the one vetted local pro from our network who will quote this project.

Compare services

Each service on the same 300 sq ft with the same extras, national prices.

ServicePer sq ftEstimated costMiddle
Full sand and refinish$3–$8$900–$2,400$1,650
Screen and recoat (buff and coat)$1–$2$300–$600$450

How this estimate works

We start from what national cost publishers agree it costs per square foot to refinish hardwood floors, add stain, repairs and stairs if you need them, and adjust only the labor part for flooring installer wages in your area.

Use the result to budget and to check quotes. Floor condition, wood species and the finish you choose move the final price; a flooring contractor can tell you whether a recoat is enough.

  • Installed price. The band that national cost publishers (2025–2026) agree on, per sq ft of floor, materials and labor together, for a full sand and refinish or a screen and recoat. Stain, board repair and stairs are priced the same way; stairs have one current source and are marked.
  • Not priced. Not priced: dustless refinishing ($6–$8 per sq ft in total, one publisher) and moving furniture ($20–$50 per room, one publisher, and contractors may or may not include it). Ask for them in the quote.
  • Replacing instead. The comparison uses our flooring calculator’s solid hardwood price plus removal of the old floor, national.
  • Your location. No page states a usable labor share (Fixr says about 80% but its own figures give 58%). We use 64% (our assumption): the labor-only midpoint ($3.50) divided by the full-refinish midpoint ($5.50), only to scale the labor part with the location factor. The labor part is multiplied by your area’s median wage for floor layers (BLS 47-2042) divided by the national median ($27.15 an hour), from BLS Occupational Employment and Wage Statistics (OEWS), Floor Layers, Except Carpet, Wood, and Hard Tiles (SOC 47-2042), hourly median wage, May 2025.
  • The result. The low and high ends add up the low and high end of every line. “Middle of the range” is the midpoint, not a prediction.

Worked example

Fully sanding and refinishing 300 sq ft of hardwood at national prices: $900–$2,400, and the middle of the range is $1,650.

See how we price.

Frequently asked questions

How much does it cost to refinish hardwood floors?

About $3–$8 per square foot for a full sand and refinish, the band two national cost publishers agree on. For 300 sq ft that is $900–$2,400.

What is a screen and recoat, and what does it cost?

A light buff of the old finish and a fresh top coat, for floors that are dull but not deeply scratched. It runs about $1–$2 per square foot, or $300–$600 for 300 sq ft.

Does changing the color add to the cost?

Yes. Staining adds about $1–$3 per square foot, so a full refinish with a new color on 300 sq ft comes to about $1,200–$3,300.

Is refinishing cheaper than replacing the floor?

Usually much cheaper. Replacing with solid hardwood and removing the old floor runs about $10–$27 per square foot in our flooring calculator, or $3,000–$8,100 for 300 sq ft.

How often should hardwood floors be refinished?

A full refinish every 7–10 years, according to This Old House and HomeGrail, with a screen and recoat in between when the finish looks dull.

Why does my ZIP code change the price?

We assume about 64% of a refinishing job is labor. We take the median hourly wage of floor layers in your metro area, or your state where the metro figure is not published, from the Bureau of Labor Statistics and compare it with the national median. Only the labor part moves.

Where the numbers come from

Prices checked 2026-11-16; next check 2027-05-16. Wages: BLS Occupational Employment and Wage Statistics (OEWS), Floor Layers, Except Carpet, Wood, and Hard Tiles (SOC 47-2042), hourly median wage, May 2025 (released 2026-05-15). ZIP codes: U.S. Census Bureau, 2020 ZCTA to county relationship file and the BLS OEWS area definitions, May 2025.

Related guides

Your estimate$900–$2,400Get a quote