French Door Installation Cost Guide Prices And Labor Rates

DoorsBy Updated 6 min read

Professional installation of exterior doors showing the complete french door installation cost setup

Short answer

Interior French door installation ranges between $600 and $3,000 fully installed, while exterior installations range from $1,300 to $5,500. Door material and style, whether a new opening must be framed, labor, permits and structural repairs drive the price. Installers charge approximately $70 to $120 per hour, and a standard door takes two to five hours.

Cost at a glance

MaterialPrice Range
Vinyl$500 – $2,000
Wood$500 – $4,000
Aluminum$650 – $3,000
Fiberglass$800 – $5,000
Clad wood$2,500 – $5,500

See the full breakdown below · Estimates, not quotes.

Searching for the prices of french doors can be quite challenging due to different resources offering different figures. One site may show a few hundred dollars, while another may list several thousand dollars for the complete installation. This is mainly due to different components that are quoted together as a composite cost. 

Some have the frame while others include labor, glass, finishing, removal and framing. Therefore, having the french door installation cost understanding is key in comparing your quotes and knowing what your contractor is charging you for each of the components.

If you're comparing costs for other exterior home upgrades, read our window replacement cost pricing guide to understand how window materials, energy-efficient features, and installation labor affect the total price.

Why Do French Door Quotes Vary

Online quotes can vary due to each source's assumptions about materials, labor, preparation, and installation scope. Some quotes include labor, while others contain doors and more work.

For example, online estimates can range from a few hundred dollars, for a basic installation, to several thousand dollars, for a full installation. The two numbers cannot be compared because they are for two different types of work.

Ask yourself first whether the work done in your quote was quoted on a labor only or turn key basis and if the doors were included. Then ask if the quote you received included installation, removal, disposal of old doors, framing, trim, hardware, glass, and finish work.

Cost To Install Interior And Exterior French Doors

The type of door has a big impact on the project price. Interior and exterior French doors differ in construction requirements and installation conditions.

Interior French Doors

Interior installations fall on a lower end of the scale, ranging between $600 and $3,000 fully installed. They require fewer finishing procedures than exterior doors.

Exterior French Doors

Exterior installations, on the other hand, range from $1,300 to $5,500 due to the additional reinforcement needed on the perimeter. If you replace an existing exterior opening, you will usually fall toward the lower end of the price range.

When choosing exterior French doors, energy efficiency is also worth considering because insulated frames and energy efficient glazing can help improve indoor comfort; see the U.S. Department of Energy's guide to energy-efficient exterior doors for more information.

Door Price by Material

Vinyl is generally the most affordable option, while clad wood is generally a higher end option that combines a wood interior with an exterior protective layer.

MaterialPrice Range
Vinyl$500 – $2,000
Wood$500 – $4,000
Aluminum$650 – $3,000
Fiberglass$800 – $5,000
Clad wood$2,500 – $5,500

Various material options like vinyl wood and fiberglass used for residential french doors

Door Price By Style

A single swing french door can cost up to $300 to $1,000, while double doors may increase the price by $400–$4,000. The overall style greatly impacts the price range, similar to choosing the material for your doors.

Telescoping sliders are more expensive and can reach up to $1,500 to $6,000, while custom installations may demand as much as $3,000 to $10,000 before labor is added.

Three Common Budget Ranges That You Need To Know About

Following are the things that you need to know:

Budget Tier: $300 – $850

This price range allows you to replace an interior french door or opt for a slab installation in an existing frame. It is the cheapest way of completing such a project in your house.

Mid Range Tier: $1,000 – $5,000

This is the most common budget tier as it accommodates professional labor, materials such as fiberglass or wood, and higher grades of glass, such as double pane.

High End Tier: $5,000+

Expansive projects, including custom french doors with sidelights or transoms cost more than $5,000, with higher expenses related to any structural modifications.

Unforeseen Expenses That Are Frequently Overlooked

Exposed wall framing and structural headers during a door replacement and remodeling project

Budgets almost always go bad not on the edge of the door but from the back of the wall (new opening requires a framing job, which runs $150 to $250). Header work if it's a load bearing wall can add thousands more, and permits are another $50 to $300.

Repairs to a frame ($100–$400) or complete replacement ($200–$650) and removal of an old door ($40–$200) should be added to the budget, as well as the trim ($100–$300), weatherproofing ($50–$150), and sidelights ($300–$1,200 each).

Ask whether contractor markup is already included in the estimate, and consider keeping about 15% of your budget available for unexpected expenses.

Labor Rates And Time Spent Installing Doors

The installers charge approximately $70 to $120 per hour for their service, and it takes two to five hours to install a standard door. Thus, the calculation would be 2 hours multiplied by $70 equals $140 on the lower end, and 5 hours multiplied by $120 equals $600 on the higher end.

Larger, glass paneled doors require two installers, which can increase the cost towards the higher end of the range.

Regional And Seasonal Variations In French Door Installation Cost

Big metro areas will generally be 20% to 30% more expensive than smaller communities due to the higher labor rates and permit costs in densely populated regions. Additionally, you might want to consider scheduling your project during the off season (late fall or winter) to secure a lower price and a better choice of dates.

Ways To Reduce The Cost Of Your Installation

Opt for standard sizes to avoid the additional costs associated with custom units that can incur additional charges of up to $200–$1,000+. Vinyl is best suited for interior french doors, while fiberglass is a fantastic choice for exterior installations. 

Where possible, go for a single door rather than a pair and inquire about any potential bundle options with your contractor. Ask for at least three different estimates with the exact same list of services: removal, disposal fees, trim work, permits, and warranty. 

Always request a written estimate and never pay the estimated amount in advance before the actual completion of the project.

If you're also considering an additional layer of protection for your exterior entryway, check out our storm door installation cost guide to compare door styles, materials, and installation expenses.

Final Thoughts

Your french door installation cost depends on what is included in the quote, if there is an existing opening, and what type of style and material you choose. Always use the average figures as a baseline for your own research and never accept any quote at face value. 

Make sure to request a detailed estimate and add 15% to it as a contingency. Armed with this information, it is now time to request a few local estimates.

Frequently asked questions

How long does it take to install french doors?

The average installation time for most people is between 2-5 hours. This can vary depending on the size of the doors being installed as well as whether they have to be custom fit.

Do I need a permit to install french doors?

In most cases you will need to apply for a permit through your local building authority if your project requires creating an entirely new doorway or making any structural changes to the area where the doors will be mounted.

Are french doors cheaper than sliding patio doors?

Single french doors tend to be less expensive than single sliding patio doors, but double french doors typically cost more than double sliding patio doors.

How long do french doors last?

Interior doors usually have a lifespan of 30-50 years while exterior french doors typically only last 15-30 years.

Can I install french doors myself?

Most interior french door replacements can easily be done by homeowners so long as they use an existing doorway frame. Exterior french doors need to be professionally sealed and flashed in order to be fully weather tight.

Do french doors add value to a home?

They increase both light value (which is appealing to buyers) and curb appeal, making them one of the best ways to make improvements that will actually help raise resale values instead of hurting them.

What materials make up cheap yet durable french doors?

Vinyl tends to be both affordable (costing anywhere from $500 to $ 2,000) while also having low maintenance requirements.

What factors influence french door installation cost the most?

Main factors are the material, design of doors, need to frame an opening or use existing, labor, permits, and structural repairs.

Next step

Get an itemized quote for your doors project

A vetted local pro from our network prices the job. Compare it against the ranges in this guide. Free, no obligation.

No spam calls. We share your details only with the one vetted local pro from our network who will quote this project.

Free, no-obligation quote

Get free quote